HOME OWNERS WELCOME - ANY SIZE ORDERS

Nu Wave - 7/8" Corrugated

Nu-Wave® Corrugated

OFFERED FACTORY CURVED TO SAVE TIME AND MONEY ON THE JOB SITE.

Corrugated Nu-Wave is a through-fastened metal panel with 7/8" deep corrugations. The panel measures 36" out-to-out, with a 32" net coverage for roof applications and a 34 2/3" net coverage for wall applications. This panel is ideal for roof, vertical or horizontal wall applications, soffit or interior accent panels.

Features & Benefits

  • Deep corrugations provide bold aesthetic shadow effects.
  • AEP Span Nu-Wave manufactured sheet lengths from 6’-0” to 45’-0.”
  • Available in 26ga, 24ga and 22ga in standard finishes – refer to AEP Span Color Charts for full range of color options, specialty finishes, and paint systems.
  • Corrugated Nu-Wave available in 20 Gauge ZINCALUME® Plus.
  • Roof and wall applications meet 2009 IBC requirements in accordance with Chapters 14 & 15, without requiring a product approval report.
  • Tested performance beyond IBC requirements
    • Air – ASTM E1680
    • Water -ASTM E1646
  • Panel assemblies are Class A Fire Rated when installed on non-combustible deck or framing per IBC or IRC. Panel assemblies are also Class A Fire Rated per UL790 when installed in accordance to UL listings. Refer to UL Listings & Specifications for information.
  • Recommended minimum 3:12 roof slope for Nu Wave
  • Manufactured in Fontana, CA and Tacoma, WA
  • Oil Canning: All flat metal surfaces can display waviness commonly referred to as “oil canning”. “Oil canning” is an inherent characteristic of steel products, not a defect, and therefore is not a cause for panel rejection.

Optional Features

  • Short cut sheets from 6'-0" to 1'-0". Additional fees and lead times may apply.
  • Custom colors and finishes are available and subject to minimum order size.
  • Perforation – available in 3 perforation patterns from 7.8%, 13.8% and 23.4% open areas (subject to 1,450 square feet minimum order).
  • Smooth curving - 20-24 gauge: Maximum length 30'-0". Minimum outside radius 3'-0".
  • Stucco embossed option available in 22-26 gauge and are subject to 1,450 square feet minimum.
T-Groove® Flush Wall Panels & Metal Soffit Panels
T-Groove® Flush Wall Panels & Metal Soffit Panels
Flush Panels for use in wall, fascia and soffit applications. Rounded interlocking leg and concealed fasteners improve appearance and strength. Painted and Galvalume®. Made to your specific sizes.
Shop now
7/8" Corrugated
7/8" Corrugated
7/8" corrugated metal roofing has deep wavy corrugations that look stunning on your metal roof. Structurally strong, incredibly impact resistant. Painted and Galvalume®. Made to your specific sizes.
Shop now
PBR/R-panels
PBR/R-panels
R-Panel is the nicest metal roofing panel for the least amount of money. Ideal for pre-engineered metal, post-frame, and agricultural buildings. Painted and Galvalume®. Made to your specific sizes.
Shop now
Western Rib® (7.2 Panel)
Western Rib® (7.2 Panel)
Ribbed 7.2” exposed fastener panels offer wider coverage and it's trapezoidal design provides superior load and span capacities. Painted and Galvalume®. Made to your specific sizes.
Shop now
Western Lock® Standing Seam
Western Lock® Standing Seam
Standing seam metal roofing is the most common metal roofing. The fasteners are concealed for both weather tightness and stream lined appearance. Painted and Galvalume®. Made to your specific sizes.
Shop now
Call Us!
Request A Quote
Request A Color Chip