HOME OWNERS WELCOME - ANY SIZE ORDERS

Design Span®hp - With or Without Striations

Design Span®HP

Available Options:

  • STRIATIONS AVAILABLE AS STANDARD OFFERING ON 16", 17", & 18" PANELS. No Additional Cost.
  • Optional Wide Batten Cap Is Available. Additional Cost.

Design Span®hp is a performance-rated structural standing seam metal roof system with net coverage of 12", 16", 17", & 18". Design Span®hp is excellent as a roof over metal or wood decking, and as a fascia or mansard over plywood or supports.

Features & Benefits

  • Subtle striations between ribs on 16" and wider panels reduce the appearance of oil-canning.
  • Available in 24 and 22 gauge in a variety of standard colors in the DuraTech®5000 and Dura Tech™ mx (polyvinylidene flouride) coating systems, including ZACtique®II or bare Zincalume® Plus.
  • Tested in accordance with UL580 & ASTM E1592.
  • AEP Span Design Span HP Meets UL 90 wind uplift requirement for all panel widths.
  • Has been tested for air infiltration per ASTM E1680, and water infiltration per ASTM E1646.
  • Design Span HP panel assemblies are Class A Fire Rated when installed on non-combustible deck or framing per IBC or IRC. Panel assemblies are also Class A Fire Rated per UL790 when installed in accordance to UL listings. Refer to UL Listings & Specifications for information.
  • Design Span HP can be installed over solid substrates or spaced support members at spans up to 4'-0".
  • Factory notching available for turn under at the eave (some limitations apply).
  • Notch provides a clean detail and reduction in labor.
  • Factory applied sealant is standard.
  • Snap-together panel, no field seaming required.
  • Wide batten cap available for a bold appearance.
  • Recommended minimum slope of 2:12. Inquire for slopes below 2:12.
  • AEP Span Design Span HP manufactured in Fontana, CA and Tacoma, WA.
  • Oil Canning: All flat metal surfaces can display waviness commonly referred to as “oil canning”. “Oil canning” is an inherent characteristic of steel products, not a defect, and therefore is not a cause for panel rejection.
  • 18" optional, additional charges and lead times apply.

Design Span HP is available in painted or Zincalume® finishes.

AEP Span Design Span HP can be shipped anywhere in the country very inexpensively on one of our route trucks. Please click Request a Quote above or Call 877-787-5467 for immediate assistance.

T-Groove® Flush Wall Panels & Metal Soffit Panels
T-Groove® Flush Wall Panels & Metal Soffit Panels
Flush Panels for use in wall, fascia and soffit applications. Rounded interlocking leg and concealed fasteners improve appearance and strength. Painted and Galvalume®. Made to your specific sizes.
Shop now
7/8" Corrugated
7/8" Corrugated
7/8" corrugated metal roofing has deep wavy corrugations that look stunning on your metal roof. Structurally strong, incredibly impact resistant. Painted and Galvalume®. Made to your specific sizes.
Shop now
PBR/R-panels
PBR/R-panels
R-Panel is the nicest metal roofing panel for the least amount of money. Ideal for pre-engineered metal, post-frame, and agricultural buildings. Painted and Galvalume®. Made to your specific sizes.
Shop now
Western Rib® (7.2 Panel)
Western Rib® (7.2 Panel)
Ribbed 7.2” exposed fastener panels offer wider coverage and it's trapezoidal design provides superior load and span capacities. Painted and Galvalume®. Made to your specific sizes.
Shop now
Western Lock® Standing Seam
Western Lock® Standing Seam
Standing seam metal roofing is the most common metal roofing. The fasteners are concealed for both weather tightness and stream lined appearance. Painted and Galvalume®. Made to your specific sizes.
Shop now
Call Us!
Request A Quote
Request A Color Chip