HOME OWNERS WELCOME - ANY SIZE ORDERS

HR-36® - 1.5" Deep Roof & Wall Panel

HR-36®

HR-36 ROOF & WALL (TYPICAL ROOF APPLICATION)

HR-36® Roof & Wall is a through-fastened metal panel with 36" net coverage. HR-36® Roof & Wall is predominantly used in industrial and commercial applications. As a wall application HR-36 can be used both vertically or horizontally to create design interest.

Features & Benefits

  • 36" coverage HR-36 roof and wall panel.
  • Minimum recommended slope for HR-36 1:12.
  • Reversed HR-36 available for wall applications only.
  • Gauges: 22ga, 24ga and 26ga in standard finishes and
  • 20ga available in ZINCALUME® Plus.
  • (Refer to AEP Span Color Charts for full range of color options,
  • prints, textures, finishes and paint systems).
  • Custom manufactured sheet lengths: 6'-0" to 50'-0".
  • Crimp curving available for a unique appearance.
  • Matching fiberglass panels available for HR-36
  • Testing: ASTM E283 (air infiltration) and ASTM E331 (water infiltration).
  • Panel assemblies are Class A Fire Rated when installed on non-combustible deck or framing per IBC or IRC or when installed in accordance to UL listings per UL790. HR-36 also UL263 rated for walls. Refer to UL Listings & Specifications for information.
  • AEP Span HR-36 manufactured in Fontana, CA and Tacoma, WA.
  • Oil Canning: All flat metal surfaces can display waviness commonly referred to as “oil canning”. “Oil canning” is an inherent characteristic of steel products, not a defect, and therefore is not a cause for panel rejection.

AEP Span HR-36 is available in painted or Zincalume® finishes.

HR-36 can be shipped anywhere in the country very inexpensively on one of our route trucks. Please click Request a Quote above or Call 877-787-5467 for immediate assistance.

T-Groove® Flush Wall Panels & Metal Soffit Panels
T-Groove® Flush Wall Panels & Metal Soffit Panels
Flush Panels for use in wall, fascia and soffit applications. Rounded interlocking leg and concealed fasteners improve appearance and strength. Painted and Galvalume®. Made to your specific sizes.
Shop now
7/8" Corrugated
7/8" Corrugated
7/8" corrugated metal roofing has deep wavy corrugations that look stunning on your metal roof. Structurally strong, incredibly impact resistant. Painted and Galvalume®. Made to your specific sizes.
Shop now
PBR/R-panels
PBR/R-panels
R-Panel is the nicest metal roofing panel for the least amount of money. Ideal for pre-engineered metal, post-frame, and agricultural buildings. Painted and Galvalume®. Made to your specific sizes.
Shop now
Western Rib® (7.2 Panel)
Western Rib® (7.2 Panel)
Ribbed 7.2” exposed fastener panels offer wider coverage and it's trapezoidal design provides superior load and span capacities. Painted and Galvalume®. Made to your specific sizes.
Shop now
Western Lock® Standing Seam
Western Lock® Standing Seam
Standing seam metal roofing is the most common metal roofing. The fasteners are concealed for both weather tightness and stream lined appearance. Painted and Galvalume®. Made to your specific sizes.
Shop now
Call Us!
Request A Quote
Request A Color Chip